Washing Line Pole - Modern Style
Washing Line Pole - Modern Style
All prices shown include VAT.
Stock item. Supplied from stock rather than made for the order, so it can be returned unused and in its original packaging within 14 days if you change your mind. Returns information.
Free 10 year warranty
See full warranty details
40mm square steel post with a 2mm wall, where most imported poles are round tube under 1mm. Hot dip galvanised and then powdercoated, so there is zinc under the colour rather than paint straight onto bare steel.
The detail that makes it: 12mm solid stainless steel tie-bars to tie your lines around, and a stainless steel square cap on the top. Solid bar, not tube, so there is nothing to crush or bend when you pull a line up tight. Against the black or grey powder coat the bright stainless gives a deliberate contrast, which is the point of this one over the plain and ornate poles.
Made in our own Sheffield workshop. Available in 2.5, 3 and 3.4 metre lengths, and we will make a different length to order.
For a fixed line. You tie the line off around the stainless tie-bars. This pole is not built for a pulley system or a retractable line, so if you want to drop the whole line to waist height to load it and then haul it back up, the loop and cleat pole is the one, because it has a cleat to tension against. On a fixed line the answer is a line prop, below.
Raising and lowering a fixed line
The line sits at the height you tie it, so a line prop is what you use to raise and lower it. Push the prop up under the line, somewhere around the middle of the span, and it lifts the loaded line clear of the ground. That is exactly the moment you want the height, because a full load of wet washing is heavy and it sags most in the middle, which is where the sheets end up on the grass. To lower it again you take the prop out and the line drops back to where it was tied. Nothing to unthread, nothing to re-tension, and no reason to change the pole.
Ours is aluminium and adjusts from 1.35 metres closed to 2.7 metres extended, so you set it to the height the line actually needs rather than being stuck with one. It is also worth having on any run over 6 metres, where the prop is carrying the span rather than setting the height.
Price is per pole. These are sold as single lengths, so a standard washing line run needs two, one at each end. Order the quantity you need.
Fitting and delivery
Dig a hole about 500mm deep, stand the pole plumb and concrete it in. Postcrete sets in five to ten minutes. Leave it 24 hours before you hang a line on it, or the pole will lean. Prefer to be able to lift the pole out again? Concrete in a ground socket instead.
Allow for that buried 500mm when you pick a size. A 2.5 metre pole gives you about 2 metres of usable height, which suits most gardens.
Keep to a maximum run of 6 metres between poles. Past that the line sags under a full load, and the extra pull puts undue stress on the poles themselves. On a longer run, put a line prop in the middle.
Stocked items are usually with you within 2 to 3 working days. Made to order sizes and colours take longer, and the lead time is shown against the option. Collections are welcome from our Sheffield workshop if you would rather pick up and save the carriage, just get in touch to arrange a time.