Wall Flange Key Clamp Fitting 42.4mm - A10

The A10 is the wall flange that terminates a run of tube against a wall, with fixing holes through the plate so it screws straight to the structure.

Every wall mounted handrail needs one at each end, and on a longer rail you will want intermediate flanges along the run to stop the tube flexing. It is equally the fitting for tying a free standing guardrail back into a building, or for finishing a rail where it runs out at a doorway, a stair head or a return wall. Because the plate carries the whole reaction from anyone leaning on the rail, the fixing into the wall matters as much as the clamp itself.

Specification

• Type code A10, handrail to wall connection flange
• Supplied with fixing holes ready to screw directly to the wall
• Suits 42.4mm outside diameter steel tube
• Galvanised finish, weatherproof for internal or external use
• Bolt together key clamp construction, no welding on site
• Part of our modular key clamp handrail system
• Powder coating available on request

Fitting note: match the screws or anchors to your substrate, since brick, block, concrete and timber all want different fixings, and check the wall is sound before you rely on it.

See the rest of the fittings in modular handrail fittings, tube by the length in handrail tube and posts, or complete rails under handrails.